Real-Time Heat Flux Extension BLS
for BLS Series
for BLS Series
including:
- Datalogger
- Weatherproof housing for datalogger
- Cables for datalogger
- Pressure sensor
- 2 Temperature sensors
with multi-plate radiation shields
- Combined temperature and humidity sensor
with multi-plate radiation shield
- Wind speed and wind direction sensor
- Mast, 2 m
- Real-Time Sensor Interface Software
- User manual
The Real-Time Heat Flux Extension upgrades a BLS of the BLS-Series to additionally provide real-time measurements of sensible heat flux and momentum flux that are valid for all - stable and unstable - atmospheric conditions. The sensors are sampled by a datalogger that is installed directly at the mast. From the datalogger the sensor values are digitally transmitted to the Scintillometer Processing Unit via a serial cable. The full-featured datalogger permits the user to upgrade or add additional meteorological sensors at any time. Due to the digital signal transmission the mast can be installed at remote locations, if an appropriate serial data link is provided, for example by using RS485 Converters or radio modems.
Product Group
Upcoming Events
InterMET Asia 2019
European Geosciences Union General Assembly 2019
11th International Symposium on Tropospheric Profiling (ISTP)
2019 Meteorological Technology World Expo
See all events
Suntec, Singapore
March 27 - 28, 2019
European Geosciences Union General Assembly 2019
Vienna, Austria
April 7 - 12, 2019
11th International Symposium on Tropospheric Profiling (ISTP)
Toulouse, France
May 20 - 24, 2019
2019 Meteorological Technology World Expo
Geneva, Switzerland
June 5 - 7, 2019
See all events
Selected Products
No products selected