This version has a 9 panel antenna and operates at a frequency of 915 MHz.
The LAP3000 is a radar wind profiler that reliably provides continuous and real-time vertical profiles of horizontal wind speed, wind direction, vertical wind speed and turbulence in the atmospheric boundary layer and beyond.
The operation is based on the scattering of electromagnetic pulses at inhomogeneities in the air with subsequent Doppler analysis of the backscattered signal. The wind vector is derived using the beam swinging method.
The LAP3000 radar wind profiler provides upper-air data with high resolution in time and height. It can substitute extensive radiosonde launching schemes. The LAP3000 works automatically and is virtually maintenance free. It is economic to operate and suited for operation at unmanned, remote sites.
The new Digital IF Processor SIRP offers characteristics never found in wind profiler signal processing before. This results in higher data quality, better height coverage and more flexibility to tailor the system output to the user’s specific needs.
- maximum range up to 5 km and more
- patch array antenna
- binary pulse coding
- Advanced Coherent Noise Suppression ACNS
- free positioning of range gates
- unlimited multiple-mode capability
- RASS extension available
- air quality
- aviation operations
- atmospheric boundary layer research
- emergency response
- global change research
- mesoscale meteorological forecasting
- vertical wind shear and turbulence
Uncompromised Wind Profiler Antenna Concept
The patch array antenna of the LAP3000 has no moving parts, ensures long-term reliability and avoids safety hazards. Using a true vertical beam, vertical wind and turbulence are accurately measured and precipitation is identified. The beams point into perpendicular directions and can be set parallel to the Earth coordinate system North-South and East-West consistent with the meteorological definitions of u and v. A fast switching between beams enhances accuracy in complex terrain. An antenna heating is available to improve system performance in cooler climates.
A New Digital Signal Processor for Wind Profilers
The new SIRP Digital IF Processor was specifically developed for radar wind profilers. It combines Advanced Coherent Noise Suppression ACNS, vertical signal oversampling, 16 chip binary pulse coding, true Gaussian matched filters, and freely programmable height gates. Vertical range resolution can be set to values finer than 50 m. The revolutionary ACNS cancels distinct radio frequency interferences and improves data quality at sites suffering from radio pollution.
Comfort and Flexibility: the New Operation Software
The SIRP interfaces to the computer using USB 3.0, supporting highest data rates. With unlimited multiple mode capability, different settings with respect to pulse length, pulse coding and pulse shaping can be operated simultaneously. This allows a single wind profiler to support different applications at the same time. An auto configuration option optimizes the settings without need of user interaction. A variety of graphical data representations, data output formats and data transfer options matches all needs.
RASS Extension Available for Precise Temperature Measurements
A RASS extension is optionally available to make the radar wind profiler a combined RASS wind and temperature profiler. The accuracy of the RASS temperature measurement is far better than that of any other remote temperature measurement technique.
LAP3000 - Available Versions (other operation frequencies and antenna sizes on request)
Order code A050000: Operating frequency 1290 MHz, 4-panel antenna
Order code A050001: Operating frequency 1290 MHz, 9-panel antenna
Order code A050002: Operating frequency 915 MHz, 4-panel antenna
Order code A050003: Operating frequency 915 MHz, 9-panel antenna
||[A050000], [A050001]: 1290 MHz, [A050002], [A050003]: 915 MHz|
||Electrically steerable micropatch phased-array panels|
||[A050000]: 28.2 dBi, [A050001]: 31.7 dBi|
||[A050002]: 24.9 dBi, [A050003]: 28.7 dBi|
|RF beam width (-3 dB, full width)
||[A050000]: 7.1 °, [A050001]: 4.8 °, [A050002]: 10.4 °, [A050003]: 6.7 °|
||[A050000], [A050002]: 3.0 m² approximately|
||[A050001], [A050003]: 6.7 m² approximately|
||4 oblique beams N,E,S,W and 1 vertical beam|
|RF power output
||[A050000], [A050001]: 1000 W peak, 0.1-150 W average|
||[A050002], [A050003]: 800 W peak, 0.1-120 W average|
|Pulse width (selectable)
||250 - 3000 ns|
||100 m approx.*|
||[A050000], [A050002]: Up to 4 km in clear air and beyond in precipitation*|
||[A050001], [A050003]: Up to 5 km in clear air and beyond in precipitation*|
|Height resolution (selectable)
||40 - 1000 m, depending on pulse width|
|Wind speed accuracy
|Wind direction accuracy
|Measurement range of horizontal wind speed components
||-100 to 100 m/s|
|Measurement range of vertical wind speed
||-20 to 20 m/s|
|Averaging time (selectable)
||100-240 VAC,1000 W|
|Operating conditions outdoor components
||Temperature: -40 °C to +50 °C|
||Relative Humidity: 0% to 100%|
|Operating conditions indoor components
||Temperature: +10 °C to +35 °C|
||Relative Humidity: 10% to 80% non-condensing|
*) depending on settings, meteorological conditions and environment
||Horizontal wind speed and direction, wind components u, v and w, standard deviations of wind, backscatter, spectra, moments, time series of I/Q samples, quality levels|
|Control and configuration
||Graphical user interface, no manual editing of configuration files required|
|Displays in real-time
||Wind barb and vector plots, time vs. height color plots, profile plots, time series plots, spectra plots and tabular displays|
||Same as displays in real-time|
|Data export in real-time
||Network output via FTP, TCP, UDP or shared folder|
||Reprocess of time series, spectra, moments or main data, fully configurable through graphical user interface|
||Additional network and command-line interfaces for automated measurement control, change of configuration and data reprocess|
|Operating system compatibility
||Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 with native 64-Bit support|
Specifications are subject to change without notice.
Extensions and Accessories (to be ordered separately)
Order code A050040: RASS extension
Order code A050012: Antenna heating for [A050000], [A050002]
Order code A050013: Antenna heating for [A050001], [A050003]